OSMOTIC-410 Bactericide

OSMOTIC-410 Bactericide

Properties:

OSMOTIC-410 has good penetrating power to microbe cell,, it can effectively kill and inhibit bacteria, fungus and algae in RO equipment. OSMOTIC-410 has the following properties:

• Non-oxidative bactericide, fast effective.
• Stripping effective to bacteria mucosity.
• Compatible with all membranes.
• Wide pH range, good bio-degradation, no pollution.
• Operation safe, non-inflammable, non-volatilization.

Specification:

items

index

Appearance

transparent liquid

pH Value，（1% water solution）

2.0-5.0

Density （20℃）g/cm3

1.02

Active  content  %

3

Usage:

Two Methods:

1st. Input 400ppm to the RO water system through proportional pump, once a time for every two weeks, 30 minutes for each time. This way is suitable for non-stop desalination operation, but the chemical dosage is big;

2nd. Stop the RO system and clean the system. If the system is seriously polluted, first, clean the system by chemical agents, sterilize next:

(i) Add water to cleaning box, make up OSMOTIC-410 to concentration 400-800ppm;

(ii) Adjust pH <7 acid="" citric="" half-life="" hydrochloric="" lsb881="" or="" p="" prolong="" with="">

(iii) Circulate for 45 minutes.

Attention:

If water supply contains hydrogen sulfide, soluble ferric ion, manganese ion (chlorine or hydrogen peroxide) OSMOTIC-410 cannot be used.

Corrosive, avoid to contact with skin and eye.

Package and Storage:

25kg plastic barrel, Storage for one year in room shady and dry place.